Tascam US-144

The follow-up to our mega popular US-122, the new US-144 delivers everything you’d want in a portable audio/MIDI interface.

Record four tracks at a time and monitor them with zero latency. Whether you have a PC or a Mac, your song ideas go down in real time, real easy. Its size means you can take it anywhere you take your laptop, yet it’s packed with features that make buying it an audio no-brainer. High quality mic inputs, digital SPDIF input and output, MIDI input and output, 96kHz/24-bit recording (better than CD quality)-all the stuff you’d want without the fluff you wouldn’t (if you’re fine with two channels and you don’t need the SPDIF I/O, have a look at the US-122L).

The US-144: the answer to your recording needs.

Main Features

Specifications

Analogue inputs and outputs
Mic inputs (MIC IN L and R) XLR, balanced
  Input impedance 2.4 kOhm
  Nominal input level –58 dBu (TRIM=max) to –14 dBu (TRIM=min)
  Maximum input level +2 dBu (TRIM=min)
Line inputs (LINE IN L and LINE/GUITAR IN R, MIC/LINE position) 6,3-mm jack, unbalanced
  Input impedance 10 kOhm
  Nominal input level –40 dBu (TRIM=max) to +4 dBu (TRIM=min)
  Maximum input level +20 dBu (TRIM=min)
Guitar input (LINE/GUITAR IN R, GUITAR position) 6,3-mm jack, unbalanced
  Input impedance 1 MOhm
  Nominal input level –51 dBu (TRIM=max) to –7 dBu (TRIM=min)
  Maximum input level +9 dBu (TRIM=min)
Line output (LINE OUT) RCA, unbalanced
  Output impedance 100 Ohm
  Nominal output level –10 dBV
  Maximum output level +6 dBV
Phones output (PHONES) 6.3-mm stereo jack
  Maximum output power 14 mW + 14 mW (32 Ohm)
Digital input and output
Digital input (DIGITAL IN) RCA (Koaxial)
  Nominal level 0.5 Vpp (75 Ohm)
  Format IEC 64958 (SPDIF)
Digital output (DIGITAL OUT) RCA (coaxial)
  Nominal level 0.5 Vpp (75 Ohm)
  Format IEC 64958 (SPDIF) or AES3-1992 (AES/EBU)
Audio performance
A/D Conversion (AK5381) 24-bit/96 kHz, 27.6 samples delay
D/A Conversion (AK4384) 24-bit/96 kHz, 19.3 samples delay
Frequency response (LINE OUT, –10 dBV) 20 Hz – 20 kHz, ±1 dB
(normal sampling rate up to 48 kHz)
20 Hz – 40 kHz, +1/–3 dB
(high sampling rate up to 96 kHz)
Signal-to-noise ratio, LINE IN to LINE OUT
  Through ADC and DAC >96 dB(A)
(INPUT = min, input impedance 40 Ohm)
  Through direct monitor >100 dB(A)
(INPUT = min, input impedance 40 Ohm)
Total harmonic distortion
(THD+N, 22 Hz to 22 kHz), LINE IN to LINE OUT
  Through ADC and DAC < 0.006%
(1 kHz sine, +20 dBu input, INPUT = min.)
  Through direct monitor < 0,004%
(1 kHz sine, +20 dBu input, INPUT = min.)
Other characteristics
MIDI IN and MIDI OUT 5-pin DIN connector (conform to MIDI specification)
USB port down stream connector, format: USB 2.0
Host computer compatibility
  Operating system Windows XP, Mac OS 10.3.9 or later
  Communication USB 2.0
  Audio/MIDI interface protocols Windows: ASIO, ASIO2, GSIF2, WDM
Macintosh: CoreAudio, CoreMIDI (OS X)
Bundled software Cubase LE4
Power 5 V, maximum current 500 mA (from USB)
Dimensions (H x W x D) 192 mm x 147 mm x 48 mm
Weight 1 kg

Design and specifications subject to change without notice.

© 2006–2010 Tascam Division · TEAC Europe GmbH
All rights reserved.
This page last updated: